AUTO PRODUCTS ... BODYSHOP PRODUCTS
Autobody Products
Aerosol Products
Body Shop Products
Brushes
Buffing Pads - Foam
Buffing Pads - Wool
Car Care Kits
Car Wash Products
Clay/Surface Prep
Cleaners

Compounds
Degreasers
Deodorants - Aerosol
Deodorants/Perfumes
Detail Supplies
Dressing - Exterior
Dressing - Interior
Engine Paint - Aerosol
Engine Paint - Bulk
Glass Cleaners
Gloss Enhancers
Microfiber Towels
Paint Sealants
Polishes/Glazes
R-Series Retail Sizes
Shampoos
Solvents/Removers
Specialty Products
Vinyl & Carpet Dyes
Wheel/Tire Cleaners
Waxes/Glazes
S-30
OVERSPRAY GUARD
PRODUCT BULLETIN

A clear, sprayable, ready to use paint masking liquid, designed for tough to mask areas like door jambs, engine compartments, grilles and panel seams. Apply with any conventional spray equipment. Dries in about 15-20 minutes to form a non-tacky, barrier against primer, paint and undercoating overspray. Washes off easily with water when finished. Available in gallon, 5 and 55 gallon sizes. Meets CARB/OTC Regulations.
 

P-11
CREAMY CUTTER
PRODUCT BULLETIN

Creamy Cutter™ is a general purpose, medium duty compound for use on base coat/clear coat paint systems. Removes 1000-2000# wet sand scratches, medium oxidation, cobwebs, blemishes, water spots and more. Leaves a clean, glossy surface, ready for polishing or final finishing. Safe for all types of paint finishes. Sweet cherry fragrance. CONTAINS NO WAX OR SILICONE. Follow with a PRO® Polish or Wax to increase gloss and protection. Available in gallon size. Meets CARB/OTC Regulations.
 
P-15
HEAVY DUTY MACHINE CLEANER
PRODUCT BULLETIN

Creamy, aggressive, oil base compound removes heavy oxidation, deep scratches, orange peel, 800-1000 grit wet sand scratches and other defects on factory applied and refinish single stage paints. Low dusting, water soluble formula cleans up easy. Leaves a smooth, clean surface. CONTAINS NO WAX OR SILICONE. Recommended for machine use. Available in gallon size. Meets CARB/OTC Regulations.
 
P-20
LIQUID COMPOUND
PRODUCT BULLETIN

Medium duty, thick bodied compound formulated with hollow micro abrasive to provide a fast initial cut that breaks down into a fine polishing material to reduce buffer marks. Removes moderate to heavy oxidation, light scratches, 1000-1200 grit wet sand scratches and other defects on factory applied and refinish clearcoats and conventional paints. Leaves a smooth, clean surface. CONTAINS NO WAX OR SILICONE. Recommended for machine use. Available in gallon size. Meets CARB/OTC Regulations.
 
P-26
CLEAR-CUT™ COMPOUND
PRODUCT BULLETIN

Medium duty, creamy machine cleaner formulated for use on factory applied and refinish clear coat paints. Synthetic micro abrasives quickly and safely remove new car finish blemishes, acid rain damage, water spots, light to moderate oxidation and 1200-1500 grit wet sand scratches. Leaves a clean, glossy surface that is ready for polishing.CONTAINS NO WAX OR SILICONE. Available in pint and gallon sizes.
P-27-Q
ULTIMATE CUTTER™ & SCRATCH REMOVER
PRODUCT BULLETIN

Thick, highly aggressive, fast working compound formulated for use on factory applied and refinish high solids paint. Synthetic micro abrasives remove heavy oxidation, 800-1200 grit wet sand scratches, orange peel and other defects. Produces a clean, dry surface ready for polishing. Water soluble formula cleans up easy. CONTAINS NO WAX OR SILICONE. Recommended for machine use. Available in quart size. Meets CARB/OTC Regulations.
 
P-28
VANISH™ MACHINE GLAZE
PRODUCT BULLETIN

A body shop safe machine glaze that removes 1500 - 2000 wet sand scratches and other imperfections on refinish paints. Also repairs cob web scratches, micro scratches and swirl marks after compounding. Its non-silicone, non-wax formula buffs fast and easy with very little dust. Natural oils brighten color and restore depth & clarity. Leaves a durable, high gloss finish. Safe for all OEM and refinish paints. Available in gallon size. Meets CARB/OTC Regulations.
 
P-30
RADIANT™ FINISH GLAZE
PRODUCT BULLETIN

This body shop safe, final finish glaze produces the ultimate “wet look” finish on all OEM and refinish paint finishes. It’s non-silicone formula works fast and easy to correct swirls and micro scratches after polishing. Restores gloss, depth & clarity and achieves a super high gloss, swirl free finish with long lasting protection. For use by hand, orbital or DA polisher. Available in gallon size. Meets CARB/OTC Regulations.
   

Return To Top